CPU |
1. AM4 Socket: Supports AMD 3rd Gen Ryzen™/ 2nd Gen Ryzen™/ 1st Gen Ryzen™/ 2nd Gen Ryzen™ with Radeon™ Vega Graphics/ 1st Gen Ryzen™ with Radeon™ Vega Graphics/ Athlon™ with Radeon™ Vega Graphics Processors |
|
|
Chipset |
1. AMD B450 |
|
|
Memory |
1. 4 x DDR4 DIMM sockets supporting up to 64 GB of system memory |
|
2. Dual channel memory architecture |
|
3. Support for DDR4 3600(O.C.)/3466(O.C.)/3200(O.C.)/2933/2667/2400/2133 MHz memory modules |
|
4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) |
|
5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules |
|
6. Support for Extreme Memory Profile (XMP) memory modules |
|
|
Onboard Graphics |
Integrated Graphics Processor: |
|
1. 1 x DVI-D port, supporting a maximum resolution of 1920×1200@60 Hz |
|
* The DVI-D port does not support D-Sub connection by adapter. |
|
2. 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz(Note) |
|
* Support for HDMI 2.0 version and HDCP 2.2.(Note) |
|
Maximum shared memory of 2 GB |
|
|
Audio |
1. Realtek® ALC887 codec |
|
2. High Definition Audio |
|
3. 2/4/5.1/7.1-channel |
|
* To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver. |
|
4. Support for S/PDIF Out |
|
|
LAN |
1. Realtek® GbE LAN chip (10/100/1000 Mbit) |
|
|
Expansion Slots |
1. 1 x PCI Express x16 slot, running at x16 (PCIEX16)(Note) |
|
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. |
|
(The PCIEX16 slot conforms to PCI Express 3.0 standard.) |
|
2. 1 x PCI Express x16 slot, running at x4 (PCIEX4) |
|
3. 1 x PCI Express x1 slot |
|
(The PCIEX4 and PCI Express x1 slots conform to PCI Express 2.0 standard.) |
|
|
Multi-Graphics Technology |
1. Support for AMD Quad-GPU CrossFire™ and 2-Way AMD CrossFire™ technologies |
|
|
Storage Interface |
1. 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe x4/x2* SSD support) |
|
* Actual support may vary by CPU. |
|
* Supports only M.2 SATA SSDs when using an AMD Athlon™-series/ 7th Gen. A-series or Athlon™ X4 APU. |
|
2. 4 x SATA 6Gb/s connectors |
|
3. Support for RAID 0, RAID 1, and RAID 10 |
|
* Refer to “1-7 Internal Connectors,” for the installation notices for the M.2 and SATA connectors. |
|
|
USB |
Chipset: |
|
1. 2 x USB 3.1 Gen 1 ports available through the internal USB header |
|
2. 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers) |
|
CPU: |
|
1. 4 x USB 3.1 Gen 1 ports on the back panel |
|
|
nternal I/O Connectors |
1. 1 x 24-pin ATX main power connector |
|
2. 1 x 8-pin ATX 12V power connector |
|
3. 1 x CPU fan header |
|
4. 1 x system fan header |
|
5. 1 x M.2 Socket 3 connector |
|
6. 4 x SATA 6Gb/s connectors |
|
7. 1 x front panel header |
|
8. 1 x front panel audio header |
|
9. 1 x S/PDIF Out header |
|
10. 1 x CPU cooler LED strip/RGB LED strip header |
|
11. 1 x USB 3.1 Gen 1 header |
|
12. 2 x USB 2.0/1.1 headers |
|
13. 1 x Trusted Platform Module (TPM) header (2×10 pin, for the GC-TPM2.0 module only) |
|
14. 1 x serial port header |
|
15. 1 x Clear CMOS jumper |
|
|
Back Panel Connectors |
1. 1 x PS/2 keyboard/mouse port |
|
2. 1 x DVI-D port |
|
3. 1 x HDMI port |
|
4. 4 x USB 3.1 Gen 1 ports |
|
5. 4 x USB 2.0/1.1 ports |
|
6. 1 x RJ-45 port |
|
7. 3 x audio jacks |
|
|
I/O Controller |
1. iTE® I/O Controller Chip |
|
|
H/W Monitoring |
1. Voltage detection |
|
2. Temperature detection |
|
3. Fan speed detection |
|
4. Overheating warning |
|
5. Fan fail warning |
|
6. Fan speed control |
|
|
IOS |
1. 1 x 128 Mbit flash |
|
2. Use of licensed AMI UEFI BIOS |
|
3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 |